 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||||||
 |
 |
 |
 |
 |
 |
 |
|
||||||||
asv specifications
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
| • ASV home • • PT series Loaders • • ST Scout 50 • • Attachments • • PT Spec Sheets • |
Specs for ASV Models featured below:
|
| PT-30 Rubber Track Loader | |
 |
|
The PT-30 undercarriage uses 24 wheels to spread the machine’s weight over the length and width of its rubber tracks. By using a maximum number of wheels, the weight per wheel is lower, track life is longer and traction is exceptional. Suspension of the undercarriage improves traction in virtually any ground condition while keeping the operator more comfortable throughout the day. With less ground pressure under its tracks than a person on foot, the PT-30 is ideal for work on fragile surfaces like lawns and landscaping. The PT-30 is powered by a rugged and reliable 1.5 liter, 3-cylinder diesel engine and a time-proven hydrostatic powertrain that includes direct drive motors and unique sprockets with rotating sleeves. The sprockets mesh with the tracks’ drive lugs for a highly efficient and smooth transfer of power that let you breeze through tough, demanding jobs. Operating the PT-30 is simple and comfortable from a seated position inside the protective ROPS/FOPS canopy. Optional cab enclosures can include a heater, sound insulation and wiper to let you work comfortably in inclement weather. Ergonomic pilot-hydraulic joysticks let you operate the PT-30 with precision and minimal effort. Even a novice operator can become productive with the PT-30 in a very short time. A thumbswitch on the right-hand joystick gives you intermittent ON/OFF control of auxiliary hydraulics. A switch lets you select a continuous mode for full-time auxiliary hydraulic power. The PT-30 can be outfitted with a wide range of loader-mounted attachments, each performance-matched so it connects easily and works productively. Included are buckets, rakes, a brush cutter, mowers, blades, a snow blower, backhoe, broom, land leveler, pallet forks and many more. Powered attachments connect easily to the PT-30’s standard auxiliary hydraulic system. |
|
| PT-30 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
MACHINE WEIGHT: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: |
STANDARD OPTIONAL |
ATTACHMENTS |
|
| Standard tracks on the PT-30 are general purpose tracks that feature oderate treads for working in the widest range of ground conditions and applications. For applications that call for extreme care and protection of fragile surfaces, consider the optional Turf Tracks. These unique tracks offer excellent traction and operation on drier surfaces and have completely smooth surface for scuff-free performance and ultimate protection of turf, landscaping and similar surfaces. |  |
Turf Track |
|
| return to top | |
|
| PT-50 Rubber Track Loader | ||||||
 |
||||||
The PT-50 has 24 wheels in its undercarriage to spread the machine’s weight over the length and width of its rubber tracks. By using a maximum number of wheels, the weight supported per wheel is lower, track life is longer and traction is exceptional. Suspension of the undercarriage increases traction even more and helps keep the operator comfortable all day long. This patented technology helps the PT-50 stay productive in virtually any ground condition. The PT-50 is powered by a smooth and reliable 2.2 liter, 4-cylinder diesel engine and a time proven hydrostatic powertrain that includes direct drive motors and unique track drive sprockets. Rotating sleeves on the sprockets mesh with the tracks’ rubber lugs for highly efficient and smooth transfer of power to the tracks. The PT-50 is easy and comfortable to operate. It can be outfitted with a choice of enclosed cabs that can include air conditioning and/or heat for operating in inclement weather. Pilot-operated joysticks give the operator precise control of machine speed, direction and the attachment. |
||||||
| PT-50 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
|||||
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: ATTACHMENTS |
STANDARD OPTIONAL |
|||||
|
||||||
| return to top | |
||||||
| PT-60 Rubber Track Loader | ||||||
 |
||||||
The undercarriage on the PT-60 uses 24 wheels to spread the machine’s weight over the length and width of its rubber tracks. By using a maximum number of wheels, the weight supported per wheel is lower, track life is longer and traction is exceptional. Suspension of the undercarriage increases traction even more and helps keep the operator comfortable all day long. This patented technology enables the PT-60 to stay productive in virtually any ground condition. The PT-60 is a purpose-built compact track loader with careful attention to geometry and distribution of machine weight. As a result, the PT-60 has exceptional balance, high ground clearance and plenty of traction. The PT-60 is powered by a smooth, reliable 2.2 liter, 4-cylinder turbocharged diesel engine. With 60 hp (44.7 kW), 140 ft-lb (190 Nm) of torque and no derating below 9,840 ft (3000 m), the PT-60 is ideal for tackling tough jobs in virtually any environment, even high altitudes. A new twospeed powertrain gives it more torque for aggressive digging in the low speed range. In high speed you get exceptionally fast travel - 38% faster than the previous model. The track drive system uses unique roller sprockets with rotating sleeves that mesh with the tracks’ rubber lugs for highly efficient and smooth transfer of power to the tracks. Steering response on the PT-60 is even better than previous models thanks to wider track spacing. The PT-60 can be outfitted with a choice of enclosed cabs that can include air conditioning and/or heat for working comfortably in inclement weather. An improved door option offers better sealing and a more robust handle than previous models. Pilot-operated joysticks give you low effort and precise control of machine speed, direction, loader and attachments. A new instrumentation package includes more gauges and warning lights than previous models. |
||||||
| PT-60 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
|||||
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: ATTACHMENTS |
STANDARD OPTIONAL |
|||||
|
||||||
| return to top | |
||||||
| PT-70 Rubber Track Loader | |
 |
|
The PT-70’s undercarriage uses 28 wheels to spread the machine’s weight over the length and width of its rubber tracks. By using a maximum number of wheels, the weight per wheel is lower, track life is longer and you get ASV’s legendary traction that makes them the best in the industry. Suspension of the undercarriage increases traction even more, promotes longer machine and track life, and keeps the operator comfortable all day long. This patented technology keeps the PT-70 productive in virtually any ground condition. For maximum undercarriage durability, all idler wheel bearings are protected by longwearing metal face seals like those used on most steel track dozers. A unique drive sprocket uses free turning sleeves for efficient low-friction transfer of drive power to the PT-70’s all-rubber tracks. The result is smooth track drive with exceptional response. The PT-70 also includes a state-of-the-art auxiliary hydraulic system that makes it easy to get more work done, even on the most demanding applications. It comes standard with powerful bi-directional high flow for brushcutting, snowblowing and other tough jobs. Standard low flow hydraulics also feature variable speed operation for precise and intermittent control of attachment functions. Quick-connect hydraulic fittings are standard, along with a supplemental electrical connection for attachments. The PT-70 comes with a spacious, comfortable operator station. The wide front opening allows easy access and can be outfitted with an optional slide-up door that allows operation with the door open or closed. An adjustable contour seat lets the operator stay productive throughout the day. The optional air conditioner is a high- efficiency unit that mounts on the roof of the operator station and blows cool air down to keep the operator comfortable, even in the hottest conditions. The PT-70 is outfitted with state-of-the-art pilot-operated joystick controls that give precise and low-effort control of all machine functions. Auxiliary hydraulic and electric functions are built into the joysticks for quick and easy control of all attachments. The PT-70’s operator station also includes conveniences like a standard 12-volt DC power port and multiple storage areas. It can be customized with a choice of cab enclosures, an adjustable suspension seat, sliding side windows and more. |
|
| PT-70 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: ATTACHMENTS |
STANDARD OPTIONAL
|
| return to top | |
|
| PT-80 Rubber Track Loader | |
 |
|
An independent, multi-level suspension helps keep the PT-80’s tracks firmly on the ground. Four wheel carriages with 16 bogie wheels per track flex independently to maximize ground contact. The result is superior traction and minimal ground pressure to keep you productive where other machines cannot work at all. The PT-80 lets you choose between the standard 18-inch (457 mm) rubber tracks or optional 20-inch (508 mm) wide tracks. The standard tracks let you maneuver faster and in more confined areas, whereas wider optional tracks give more flotation. For maximum undercarriage durability, all idler wheel bearings are protected by longwearing metal face seals like those used on most steel track dozers. A unique drive sprocket uses free-turning sleeves for efficient low-friction transfer of drive power to the PT-80’s all-rubber tracks. The result is smooth track drive with exceptional response. The PT-80’s two-speed direct drive transmission lets you select low for maximum torque or high for fastest travel. A button on the joystick lets the operator shift effortlessly between speed ranges. The PT-80’s state-of-the-art auxiliary hydraulic system makes it easy to get more done. It comes standard with bi-directional high flow for brushcutting, snowblowing and more. Low flow hydraulics feature variable speed operation for precise control of attachment functions. Quick-connect hydraulic fittings are standard, along with a supplemental electrical connection for attachments. The PT-80 comes with a spacious, comfortable operator station. The wide front opening allows easy access and can be outfitted with an optional slide-up door that allows operation with the door open or closed. An adjustable contour seat lets the operator stay productive throughout the day. The optional air conditioner is a high efficiency unit that mounts on the roof of the operator station and blows cool air down to keep the operator comfortable, even in the hottest conditions. The PT-80 is outfitted with state-of-the-art pilot-operated joystick controls that give precise and low-effort control of all machine functions. Auxiliary hydraulic and electric functions are built into the joysticks for quick and easy control of all attachments. The PT-80’s operator station also includes conveniences like a standard 12-volt DC power port and multiple storage areas. It can be customized with a choice of cab enclosures, an adjustable suspension seat, sliding side windows and more. |
|
| PT-80 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: ATTACHMENTS |
STANDARD OPTIONAL
|
| return to top | |
|
| PT-100 Rubber Track Loader | |
 |
|
The PT-100 is the most powerful ASV compact track loader, with 99.9 horsepower (74.5 kW) and 304 ft/lb (412 Nm) of torque. High torque lets the PT-100 breeze through demanding work. To keep it running, even in hot, humid climates, the PT-100 uses a high capacity cooling system. The PT-100’s undercarriage uses 42 wheels to spread the machine’s weight over the length and width of its rubber tracks. By using a maximum number of wheels, the weight supported per wheel is lower, track life is longer and you get the traction that makes ASV compact track loaders among the most productive in the industry. Suspension of the undercarriage increases traction even more and helps keep the operator comfortable all day long. This patented technology lets the PT-100 stay productive in virtually any ground condition. The PT-100 uses a time-proven hydrostatic powertrain that includes direct drive motors and unique track drive sprockets. Rotating sleeves on the sprockets mesh with the tracks’ rubber lugs for highly efficient and smooth transfer of power to the tracks. Two-speed drive motors let the operator select low speed for aggressive digging and high speed for faster travel. The standard auxiliary hydraulic system on the PT-100 offers intermittent or continuous low flow and continuous high flow. An advanced load-sensing hydraulic system gives the PT-100 about 10 percent more hydraulic power than other systems, making it the ideal platform for demanding jobs like brush cutting, mulching - even pavement milling. Standard equipment includes quick-connect hydraulic fittings and a pre-wired electric connector for control of attachments. A hydraulic quick-attach makes connection to attachments fast and easy. The PT-100 is easy and comfortable to operate. It can be outfitted with a choice of enclosed cabs that can include air conditioning and/or heat for operating in inclement weather. Pilot-operated joysticks give the operator low-effort and precise control of machine speed, direction and the attachment. |
|
| PT-100 SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES: ATTACHMENTS |
STANDARD OPTIONAL A special PT-100 Forestry model is also available that includes everything including a pressurized cab for rugged, productive work into the deepest woods. |
| return to top | |
|
| PT-100 Forestry | |
 |
|
This special version of the PT-100 is based on ASV’s most powerful compact track loader, with 99.9 horsepower (74.5 kW) and 306 ft/lb (415 Nm) of torque. High torque lets it breeze through demanding high-production jobs that other machines can’t handle. To keep it running, even in hot, humid conditions, the PT-100 uses a side-by-side radiator and hydraulic oil cooler. A new Cleanfix ® auto-reversing fan helps keep the cooling system running at peak performance with less downtime for cleaning away debris. The PT-100’s undercarriage uses 42 wheels to spread the machine’s weight over the length and width of its rubber tracks for lower ground pressure and higher traction. Heavy-duty independent suspension of the undercarriage increases traction even more and helps keep the operator comfortable all day long. New tapered bearings with face seals on all roller wheels maximize durability in tough forest conditions. The PT-100 uses a time-proven hydrostatic powertrain with direct drive motors and unique track drive sprockets that are located up and out of the way of ground debris. The auxiliary hydraulic system offers intermittent or continuous low flow and continuous high flow. An advanced load-sensing hydraulic system gives the PT-100 about 10 percent more hydraulic power than other systems, making it the ideal platform for demanding jobs like brushcutting. Standard equipment includes quick-connect hydraulic fittings and a pre-wired electric connector for control of attachments. A hydraulic quick-attach is also standard. The PT-100 Forestry loader is easy and comfortable to operate. It comes standard with the industry’s best pressurized cab that includes a high performance climate control system, extra insulation and an adjustable suspension seat to keep the operator comfortable and content. Pilot-operated joysticks give low effort and precise control of machine speed, direction and the attachment. The dash panel includes a full set of gauges, switches and space to mount customer-supplied extras like GPS or audio units. This special cab also has front and rear emergency exits that can be accessed inside and out. The comprehensive forestry guarding system includes a heavy-duty polycarbonate front door with wiper, side and rear window mesh protectors, rear brushguard and limb-risers, heavy-duty hinged skid plates, climate control system protection, light protectors and hydraulic and electric connector guarding. |
|
| PT-100 forestry SPECIFICATIONS & DIMENSIONs | STANDARD & OPTIONAL EQUIPMENT |
MACHINE WEIGHTS: TRACKS: AUXILIARY HYDRAULICS: ENGINE: OPERATING SPECIFICATIONS: SERVICE REFILL CAPACITIES:
|
STANDARD OPTIONAL The comprehensive forestry guarding system includes a heavy-duty polycarbonate front door with wiper, side and rear window mesh protectors, rear brushguard and limb-risers, heavy-duty hinged skid plates, climate control system protection, light protectors and hydraulic and electric connector guarding. |
| return to top | |
|
